阿杰 发表于 2007-3-11 13:52:27

VB6实现的自动停靠窗体

1、新建EXE工程。
2、添加模块，键入以下代码：'－－－－－－－－－－－ 说明 －－－－－－－－－－－－－－－－－
'修改Private Const Margin As Long 的值可以改变吸附距离
'将本模块考入你的程序，然后在你的代码中写入Hook和Unhook即可
'
'----------------------------------------------------------------
Public Declare Function SystemParametersInfo Lib "user32.dll" Alias "SystemParametersInfoA" ( _
   ByVal uAction As Long, _
   ByVal uParam As Long, _
   lpvParam As Any, _
   ByVal fuWinIni As Long) As Long '去掉lpvParam的Byval修饰符才可以正常工作
   
Public Declare Function SetWindowLong Lib "user32.dll" Alias "SetWindowLongA" ( _
   ByVal hwnd As Long, _
   ByVal nIndex As Long, _
   ByVal dwNewLong As Long) As Long
Public Declare Function GetWindowLong Lib "user32.dll" Alias "GetWindowLongA" ( _
   ByVal hwnd As Long, _
   ByVal nIndex As Long) As Long
Public Declare Function CallWindowProc Lib "user32.dll" Alias "CallWindowProcA" ( _
   ByVal lpPrevWndFunc As Long, _
   ByVal hwnd As Long, _
   ByVal msg As Long, _
   ByVal wParam As Long, _
   ByVal lParam As Long) As Long
Public Declare Sub CopyMemory Lib "kernel32.dll" Alias "RtlMoveMemory" ( _
   Destination As Any, _
   Source As Any, _
   ByVal Length As Long)
   
   
Public Type WINDOWPOS
    hwnd As Long
    hWndInsertAfter As Long
    x As Long
    y As Long
    cx As Long
    cy As Long
    flags As Long
End Type
Public Type RECT
    Left As Long
    Top As Long
    Right As Long
    Bottom As Long
End Type
Public Const SPI_GETWORKAREA As Long = 48
Public Const GWL_WNDPROC As Long = -4
Public Const WM_WINDOWPOSCHANGING As Long = &H46
Global lpPrevWndProc As Long
Global gHW As Long
Private Const Margin As Long = 20
Public Sub Hook()
   lpPrevWndProc = SetWindowLong(gHW, GWL_WNDPROC, AddressOf WindowProc)
End Sub
Public Sub Unhook()
   Dim temp As Long
   temp = SetWindowLong(gHW, GWL_WNDPROC, lpPrevWndProc)
End Sub
Function WindowProc(ByVal hw As Long, ByVal uMsg As Long, ByVal wParam As Long, ByVal lParam As Long) As Long
Dim lpwndpos As WINDOWPOS
Dim WorkArea As RECT
    If uMsg = WM_WINDOWPOSCHANGING Then
      SystemParametersInfo SPI_GETWORKAREA, 0, WorkArea, 0
      CopyMemory lpwndpos, ByVal lParam, Len(lpwndpos)
      
      If lpwndpos.x - WorkArea.Left < Margin And WorkArea.Left - lpwndpos.x < Margin Then lpwndpos.x = 0
      If lpwndpos.y - WorkArea.Top < Margin And WorkArea.Top - lpwndpos.y < Margin Then lpwndpos.y = 0
      If WorkArea.Right - lpwndpos.x - lpwndpos.cx < Margin And lpwndpos.x + lpwndpos.cx - WorkArea.Right < Margin Then lpwndpos.x = WorkArea.Right - lpwndpos.cx
      If WorkArea.Bottom - lpwndpos.y - lpwndpos.cy < Margin And lpwndpos.y + lpwndpos.cy - WorkArea.Bottom < Margin Then lpwndpos.y = WorkArea.Bottom - lpwndpos.cy
      
      CopyMemory ByVal lParam, lpwndpos, Len(lpwndpos)
    End If
   
    WindowProc = CallWindowProc(lpPrevWndProc, hw, uMsg, wParam, lParam)
End Function3、在Form1的代码中键入：Private Sub Form_Load()
gHW = Me.hwnd
Hook
End Sub
Private Sub Form_Unload(Cancel As Integer)
Unhook
End Sub4、运行。
挺简单的。

dabian001 发表于 2007-3-13 11:55:07

<p>快速回复不能打中文字</p><p></p><p>我喜欢这代码</p>

马大哈 发表于 2007-3-14 18:52:41

<p>这个代码我也喜欢~~~~呵呵</p><p>中文问题,用鼠标点了一下就行的</p><p>有时焦点没有正确切换过去</p><p>因此就算看到光标在那里闪,也只能打E文,是吧</p><p></p>

dabian001 发表于 2007-3-25 11:30:08

怎么用啊???跟谁吸附???我怎么吸附不了??

马大哈 发表于 2007-3-26 16:35:58

<p>我也来一个:</p>
<p>&nbsp;</p>
<p><font face="Verdana"><a href="dispbbs.asp?boardid=28&amp;Id=1447">http://www.m5home.com/bbs/viewthread.php?tid=1447</a></font></p>
[此贴子已经被作者于2009-3-16 16:33:31编辑过]

马大哈 发表于 2007-3-26 16:36:20

这个是仿QQ的

5988143 发表于 2009-3-16 09:52:43

學習了,

jixu2008 发表于 2009-3-26 19:51:19

好东西除了要学习还要支持,支持楼主.
页: [1]
查看完整版本: VB6实现的自动停靠窗体